Replacing more light fixtures

A few years ago, we had an energy audit and replaced all our bucket light fixtures with cooler, more efficient ones that would allow us to insulate the holes they created in the ceiling.  (The electrician DH tried to hire basically told him that was the best option and to do it all himself instead of paying the electrician, so he did.)

This year one of the fluorescent ballasts in the kitchen sort of broke (it could still be used, but even with a brand new bulb, it took a long time to turn on and then still flickered and after some observation DH suspected it might be dangerous).  The fluorescents in a couple of the other rooms, including my closet, weren’t in that great shape anyway (nothing like a strobe effect to trigger migraines…), and DH wanted to move to LEDs, especially since the fluorescent hum was driving him crazy.  Although LEDs fit in the sockets it wasn’t clear that just swapping them in was safe given the various electric ratings.

Given our track record of the electrician coming out only to tell DH how to do small jobs himself, we decided it was time to get rid of all of our fluorescent lighting (make it a big job!).

Here’s what that consisted of, according to the electrician’s quote:

CHANGE LAMPS IN 3 GARAGE FIXTURES TO LINE VOLTAGE LED
REMOVE WRAP IN UTILITY ROOM AND REPLACE WITH DISC LIGHT
REMOVE WRAP IN 4 CLOSETS AND REPLACE WITH DISC LIGHT
REMOVE WRAP IN PANTRY AND REPLACE WITH DISC LIGHT
REPLACE LAMPS IN TWO KITCHEN FIXTURES WITH LINE VOLTAGE LED LAMPS

The quote for all of this was $925.  That’s a lot!  But it’s also 11 light fixtures.  (Some of the big rectangular fluorescent lights were actually two ballasts next to each other.)

According to DH, two of them worked for three hours, installing 5 fixtures’ worth of line-fed tubular LEDs, removing 6 fixtures and replacing with disk lights.

$12 per tubular LED Keystone KT-LED15T8-48GC-850-DX2
$30 per disk light SunSet 15W LED by Luminance

5*2*12 = $120 for the tubulars.
6*30 = $180 for the disks.

So $300 in parts, let’s round up to $350 for incidentals (ex. wires, putty for the holes left by the fluorescent ballasts, extra screws. etc.).

The quote was for $925. So $575 in labor.
$575 / 2 / 3 = $95.8/ person hour.  Which is a little high but is within a reasonable range of going rates for the area.  And it helps assuage a little of the guilt I had for us calling the electrician out twice before only to have him give DH good advice and detailed instructions for what to do in exchange for no money.

Overall we are really happy with the results.  One exception was that the light in my closet wasn’t bright enough and left eerie shadows.  Fortunately that was an easy $30 disc light swap that we could do ourselves.  Though now we have an extra light in case one of the other ones breaks sometime before the 22 year expected life of the new LEDs…

What kind of lighting do you have in your place? 

Advertisements